Generic Data Types

We use generics to create definitions for item declarations, such as structs and functions, which we can then use with many different concrete data types. In Cairo we can use generics when defining functions, structs, enums, traits, implementations and methods! In this chapter we are going to take a look at how to effectively use generic types with all of them.

Generic Functions

When defining a function that uses generics, we place the generics in the function signature, where we would usually specify the data types of the parameter and return value. For example, imagine we want to create a function which given two Array of items, will return the largest one. If we need to perform this operation for lists of different types, then we would have to redefine the function each time. Luckily we can implement the function once using generics and move on to other tasks.


// Specify generic type T between the angulars
fn largest_list<T>(l1: Array<T>, l2: Array<T>) -> Array<T> {
    if l1.len() > l2.len() {
        l1
    } else {
        l2
    }
}

fn main() {
    let mut l1 = ArrayTrait::new();
    let mut l2 = ArrayTrait::new();

    l1.append(1);
    l1.append(2);

    l2.append(3);
    l2.append(4);
    l2.append(5);

    // There is no need to specify the concrete type of T because
    // it is inferred by the compiler
    let l3 = largest_list(l1, l2);
}

The largest_list function compares two lists of the same type and returns the one with more elements and drops the other. If you compile the previous code, you will notice that it will fail with an error saying that there are no traits defined for dropping an array of a generic type. This happens because the compiler has no way to guarantee that an Array<T> is droppable when executing the main function. In order to drop an array of T, the compiler must first know how to drop T. This can be fixed by specifying in the function signature of largest_list that T must implement the drop trait. The correct function definition of largest_list is as follows:

#![allow(unused)]
fn main() {
fn largest_list<T, +Drop<T>>(l1: Array<T>, l2: Array<T>) -> Array<T> {
    if l1.len() > l2.len() {
        l1
    } else {
        l2
    }
}
}

The new largest_list function includes in its definition the requirement that whatever generic type is placed there, it must be droppable. The main function remains unchanged, the compiler is smart enough to deduce which concrete type is being used and if it implements the Drop trait.

Constraints for Generic Types

When defining generic types, it is useful to have information about them. Knowing which traits a generic type implements allow us to use them more effectively in a functions logic at the cost of constraining the generic types that can be used with the function. We saw an example of this previously by adding the TDrop implementation as part of the generic arguments of largest_list. While TDrop was added to satisfy the compiler's requirements, we can also add constraints to benefit our function logic.

Imagine that we want, given a list of elements of some generic type T, to find the smallest element among them. Initially, we know that for an element of type T to be comparable, it must implement the PartialOrd trait. The resulting function would be:


// Given a list of T get the smallest one.
// The PartialOrd trait implements comparison operations for T
fn smallest_element<T, +PartialOrd<T>>(list: @Array<T>) -> T {
    // This represents the smallest element through the iteration
    // Notice that we use the desnap (*) operator
    let mut smallest = *list[0];

    // The index we will use to move through the list
    let mut index = 1;

    // Iterate through the whole list storing the smallest
    loop {
        if index >= list.len() {
            break smallest;
        }
        if *list[index] < smallest {
            smallest = *list[index];
        }
        index = index + 1;
    }
}

fn main() {
    let mut list: Array<u8> = ArrayTrait::new();
    list.append(5);
    list.append(3);
    list.append(10);

    // We need to specify that we are passing a snapshot of `list` as an argument
    let s = smallest_element(@list);
    assert(s == 3, 0);
}

The smallest_element function uses a generic type T that implements the PartialOrd trait, takes a snapshot of an Array<T> as a parameter and returns a copy of the smallest element. Because the parameter is of type @Array<T>, we no longer need to drop it at the end of the execution and so we don't require to implement the Drop trait for T as well. Why it does not compile then?

When indexing on list, the value results in a snap of the indexed element, unless PartialOrd is implemented for @T we need to desnap the element using *. The * operation requires a copy from @T toT, which means that T needs to implement the Copy trait. After copying an element of type @T to T, there are now variables with type T that need to be dropped, requiring for T to implement the Drop trait as well. We must then add both Drop and Copy traits implementation for the function to be correct. After updating thesmallest_element function the resulting code would be:

#![allow(unused)]
fn main() {
fn smallest_element<T, impl TPartialOrd: PartialOrd<T>, impl TCopy: Copy<T>, impl TDrop: Drop<T>>(
    list: @Array<T>
) -> T {
    let mut smallest = *list[0];
    let mut index = 1;
    loop {
        if index >= list.len() {
            break smallest;
        }
        if *list[index] < smallest {
            smallest = *list[index];
        }
        index = index + 1;
    }
}
}

Anonymous Generic Implementation Parameter (+ operator)

Until now, we have always specified a name for each implementation of the required generic trait: TPartialOrd for PartialOrd<T>, TDrop for Drop<T>, and TCopy for Copy<T>.

However, most of the time, we don't use the implementation in the function body; we only use it as a constraint. In these cases, we can use the + operator to specify that the generic type must implement a trait without naming the implementation. This is referred to as an anonymous generic implementation parameter.

For example, +PartialOrd<T> is equivalent to impl TPartialOrd: PartialOrd<T>.

We can rewrite the smallest_element function signature as follows:

#![allow(unused)]
fn main() {
fn smallest_element<T, +PartialOrd<T>, +Copy<T>, +Drop<T>>(list: @Array<T>) -> T {
    let mut smallest = *list[0];
    let mut index = 1;
    loop {
        if index >= list.len() {
            break smallest;
        }
        if *list[index] < smallest {
            smallest = *list[index];
        }
        index = index + 1;
    }
}
}

Structs

We can also define structs to use a generic type parameter for one or more fields using the <> syntax, similar to function definitions. First we declare the name of the type parameter inside the angle brackets just after the name of the struct. Then we use the generic type in the struct definition where we would otherwise specify concrete data types. The next code example shows the definition Wallet<T> which has a balance field of type T.

#[derive(Drop)]
struct Wallet<T> {
    balance: T
}


fn main() {
    let w = Wallet { balance: 3 };
}

The above code derives the Drop trait for the Wallet type automatically. It is equivalent to writing the following code:

struct Wallet<T> {
    balance: T
}

impl WalletDrop<T, +Drop<T>> of Drop<Wallet<T>>;

fn main() {
    let w = Wallet { balance: 3 };
}

We avoid using the derive macro for Drop implementation of Wallet and instead define our own WalletDrop implementation. Notice that we must define, just like functions, an additional generic type for WalletDrop saying that T implements the Drop trait as well. We are basically saying that the struct Wallet<T> is droppable as long as T is also droppable.

Finally, if we want to add a field to Wallet representing its address and we want that field to be different than T but generic as well, we can simply add another generic type between the <>:

#[derive(Drop)]
struct Wallet<T, U> {
    balance: T,
    address: U,
}

fn main() {
    let w = Wallet { balance: 3, address: 14 };
}

We add to Wallet struct definition a new generic type U and then assign this type to the new field member address. Notice that the derive attribute for the Drop trait works for U as well.

Enums

As we did with structs, we can define enums to hold generic data types in their variants. For example the Option<T> enum provided by the Cairo core library:

enum Option<T> {
    Some: T,
    None,
}

The Option<T> enum is generic over a type T and has two variants: Some, which holds one value of type T and None that doesn't hold any value. By using the Option<T> enum, it is possible for us to express the abstract concept of an optional value and because the value has a generic type T we can use this abstraction with any type.

Enums can use multiple generic types as well, like definition of the Result<T, E> enum that the core library provides:

enum Result<T, E> {
    Ok: T,
    Err: E,
}

The Result<T, E> enum has two generic types, T and E, and two variants: Ok which holds the value of type T and Err which holds the value of type E. This definition makes it convenient to use the Result enum anywhere we have an operation that might succeed (by returning a value of type T) or fail (by returning a value of type E).

Generic Methods

We can implement methods on structs and enums, and use the generic types in their definition, too. Using our previous definition of Wallet<T> struct, we define a balance method for it:

#[derive(Copy, Drop)]
struct Wallet<T> {
    balance: T
}

trait WalletTrait<T> {
    fn balance(self: @Wallet<T>) -> T;
}

impl WalletImpl<T, +Copy<T>> of WalletTrait<T> {
    fn balance(self: @Wallet<T>) -> T {
        return *self.balance;
    }
}

fn main() {
    let w = Wallet { balance: 50 };
    assert(w.balance() == 50, 0);
}

We first define WalletTrait<T> trait using a generic type T which defines a method that returns a snapshot of the field address from Wallet. Then we give an implementation for the trait in WalletImpl<T>. Note that you need to include a generic type in both definitions of the trait and the implementation.

We can also specify constraints on generic types when defining methods on the type. We could, for example, implement methods only for Wallet<u128> instances rather than Wallet<T>. In the code example we define an implementation for wallets which have a concrete type of u128 for the balance field.

#[derive(Copy, Drop)]
struct Wallet<T> {
    balance: T
}

/// Generic trait for wallets
trait WalletTrait<T> {
    fn balance(self: @Wallet<T>) -> T;
}

impl WalletImpl<T, +Copy<T>> of WalletTrait<T> {
    fn balance(self: @Wallet<T>) -> T {
        return *self.balance;
    }
}

/// Trait for wallets of type u128
trait WalletReceiveTrait {
    fn receive(ref self: Wallet<u128>, value: u128);
}

impl WalletReceiveImpl of WalletReceiveTrait {
    fn receive(ref self: Wallet<u128>, value: u128) {
        self.balance += value;
    }
}

fn main() {
    let mut w = Wallet { balance: 50 };
    assert(w.balance() == 50, 0);

    w.receive(100);
    assert(w.balance() == 150, 0);
}

The new method receive increments the size of the balance of any instance of a Wallet<u128>. Notice that we changed the main function making w a mutable variable in order for it to be able to update its balance. If we were to change the initialization of w by changing the type of balance the previous code wouldn't compile.

Cairo allows us to define generic methods inside generic traits as well. Using the past implementation from Wallet<U, V> we are going to define a trait that picks two wallets of different generic types and create a new one with a generic type of each. First, let's rewrite the struct definition:

struct Wallet<T, U> {
    balance: T,
    address: U,
}

Next we are going to naively define the mixup trait and implementation:

// This does not compile!
trait WalletMixTrait<T1, U1> {
    fn mixup<T2, U2>(self: Wallet<T1, U1>, other: Wallet<T2, U2>) -> Wallet<T1, U2>;
}

impl WalletMixImpl<T1, U1> of WalletMixTrait<T1, U1> {
    fn mixup<T2, U2>(self: Wallet<T1, U1>, other: Wallet<T2, U2>) -> Wallet<T1, U2> {
        Wallet { balance: self.balance, address: other.address }
    }
}

We are creating a trait WalletMixTrait<T1, U1> with the mixup<T2, U2> methods which given an instance of Wallet<T1, U1> and Wallet<T2, U2> creates a new Wallet<T1, U2>. As mixup signature specify, both self and other are getting dropped at the end of the function, which is the reason for this code not to compile. If you have been following from the start until now you would know that we must add a requirement for all the generic types specifying that they will implement the Drop trait in order for the compiler to know how to drop instances of Wallet<T, U>. The updated implementation is as follow:

#![allow(unused)]
fn main() {
trait WalletMixTrait<T1, U1> {
    fn mixup<T2, +Drop<T2>, U2, +Drop<U2>>(
        self: Wallet<T1, U1>, other: Wallet<T2, U2>
    ) -> Wallet<T1, U2>;
}

impl WalletMixImpl<T1, +Drop<T1>, U1, +Drop<U1>> of WalletMixTrait<T1, U1> {
    fn mixup<T2, +Drop<T2>, U2, +Drop<U2>>(
        self: Wallet<T1, U1>, other: Wallet<T2, U2>
    ) -> Wallet<T1, U2> {
        Wallet { balance: self.balance, address: other.address }
    }
}
}

We add the requirements for T1 and U1 to be droppable on WalletMixImpl declaration. Then we do the same for T2 and U2, this time as part of mixup signature. We can now try the mixup function:

fn main() {
    let w1 = Wallet { balance: true, address: 10 };
    let w2 = Wallet { balance: 32, address: 100 };

    let w3 = w1.mixup(w2);

    assert(w3.balance == true, 0);
    assert(w3.address == 100, 0);
}

We first create two instances: one of Wallet<bool, u128> and the other of Wallet<felt252, u8>. Then, we call mixup and create a new Wallet<bool, u8> instance.

Last change: 2023-12-09, commit: acd03a1